Weergegeven resultaten: 1 t/m 2 van 2

Discussie: Crew ChiefV4 Digitale Race engineer voor AC/R3E/PCARS/RF1&2/AMS

  1. #1
    Senior Member HoiHman's schermafbeelding
    Naam
    Henk
    Lid sinds
    1 juli 2012
    Berichten
    606

    Standaard Crew ChiefV4 Digitale Race engineer voor AC/R3E/PCARS/RF1&2/AMS

    Sinds een paar maanden gebruik ik Crew ChiefV4

    Deze digitale race engineer houdt je op de hoogte tijdens de races over zaken zoals delta's, ronde tijden, gaps, sector tijden, banden, brandstof, wie de leider is ect ect. Daarnaast is crewchief ook spotter en driver coach.

    De app is gratis en word constant ge-update met onder andere alle namen van de AI tegenstanders. Je kunt zelfs ook je naam door geven voor MP races.

    Je kunt via voice recognition gewoon vragen stellen aan je CrewChief.

    Ik vind de app zo geweldig revoltionair dat ik de impact ervan vergelijk met FFB en VR.
    Toen ik voor de 1e keer hoorde : "Come one stop funning around, fucking pass this guy" omdat ik te lang achter een auto bleef hangen, zat ik met een big smile achter het stuur.

    Bij racen in VR is de Crew Chief onmisbaar. Je hebt geen HUD meer nodig en de spotter heeft al menig crash voorkomen. Hieronder een video en een schaamteloze copy/paste van het crewchief topic op het forum van sector3.






    Citaat Oorspronkelijk geplaatst door mr_belowski, post: 25644, member: 1027
    This is my little Crew Chief application, which works for PCars and RaceRoom. This release is the first 'official' RaceRoom release since the game update, which has added loads of loads of data which Crew Chief can use.

    This application runs in the background while you play RaceRoom. It reads data from the Shared Memory block that RaceRoom writes to, and it uses it to trigger audio messages. To run this windows 7 and 8 / 8.1 users will need to install the .Net framework version 4.5.

    Download V4 here:

    http://crewchief.isnais.de/CrewChiefV4.msi

    This is an MSI installer which your browser will probably warn you about - "not commonly downloaded and could be dangerous". This is simply because the .msi file isn't digitally signed - there's nothing I can do about this at the moment.

    And a massive Thankyou to Robert Winkler from these very forums for the hosting awesomeness.


    Here's a grotty video of the older version, with some DTM 2014 action with me using the app but being too engrossed in the race to ask it many questions..

    [MEDIA=youtube]fFRO_zhV5rU[/MEDIA]

    The app includes many driver name recordings for AI drivers. For those with a mic, the app can recognise drivers' names if they're sensible (firstname [space] lastname)



    Righty, here's the readme....



    CrewChief version 4.

    Changelog
    ---------
    Version 4.2.1.4: loads of stuff
    ....[to long to post here]


    Known Issues Which Aren't Fixable
    ---------------------------------
    Joining a session part way through (practice or qualify session online) will result in the app having an incomplete set of data for opponent lap and sector times. In such cases the best opponent lap and sector data is inaccurate. For Raceroom we can get the fastest opponent lap time, but if this lap was completed before the app was running, the sectors within that lap aren't accessible. In this case the pace report will include the lap time delta, but there'll be no sector delta reports. As soon as an opponent sets a faster lap, the app will have up to date best lap data so the pace and sector reports will be accurate and complete.


    RaceRoom uses a 'slot_id' field to uniquely identify drivers in a race. However, this field doesn't really work properly (there are lots of issues with it), so the app has to use the driver's names. Driver names for AI driver are not unique. All the lap time and other data held for each driver is indexed by driver name so if a race has 2 or more drivers with the same name, the app will get things like lap and sector times wrong. This is only a problem racing the AI - be aware that if you have a car class with a limited number of unique AI drivers (German Nationals / Americal Nationals / Hill Climb Legends / etc), but select a field size greater than this, the app will do weird things.

    RaceRoom doesn't have a pre-start procedure phase for offline races, and in the pre-start phase online ("Gridwalk") very little valid and accurate data is available, so there are no messages about pit window, race position, etc before the lights come on.

    Detecting 'good' passes isn't really feasible. I've tried to limit the 'good pass' messages to overtakes that are reasonably 'secure', don't result in the other car slowing excessively, and don't involve the player going off-track. I can't, for example, tell the difference between a clean pass and a bump-and-run punt, so you might get congratulated for driving like a berk.


    Quick start
    -----------
    Windows 7 and 8 / 8.1 users will need to install .net 4.5 to use the app. This is already part of windows 10. Download the CrewChiefV4.msi installer and install the app. This will create a start menu shortcut - use this to run the app. On the first run, you'll be prompted to download the sounds and driver name packs (the big green buttons). Once this is done the app will ask to be restarted, then you're good to go.

    One Windows 10 user reported that, once he'd installed the app, he had to run the app as administrator the first time he launched. Try this if the app fails to run first time.


    Running with voice recognition
    ------------------------------
    If you want to use voice recognition, download the correct speech recognition installers for your system (speech_recognition_32bit.zip or speech_recognition_64bit.zip).

    The 64 bit installers are here:
    https://drive.google.com/file/d/0B4K...ew?usp=sharing

    The 32 bit installers are here:
    https://drive.google.com/file/d/0B4K...ew?usp=sharing

    Alternatively, the Microsoft download links are, for the runtime installer (do this one first)
    https://www.microsoft.com/en-gb/down....aspx?id=27225

    For the language packs (use which ever en-XX best suits your location / accent)
    https://www.microsoft.com/en-us/down....aspx?id=27224


    Run SpeechPlatformRuntime.msi (this is the MS speech recognition engine), then run MSSpeech_SR_en-GB_TELE.msi or MSSpeech_SR_en-US_TELE.msi depending on your preferred accent (these are the 'cultural info' installers). If you want to use US speech recognition (MSSpeech_SR_en-US_TELE.msi) you must modify the "speech_recognition_location" property to "en-US". This can be done by modifying the property value in the application's Properties area. If you're happy with en-GB you don't need to do anything other than run the 2 speech recognition installers.

    For speech recognition, you need a microphone configured as the default "Recording" device in Windows.

    To get started, run the app and choose a "Voice recognition mode". There are 3 modes (the radio buttons at the bottom right). "Disabled" means that the app won't attempt any speech recognition. "Hold button" means you have to hold down a button while you speak, and release the button when you're finished. "Toggle button" means you press a button once to start the speech recognition, and the app will continue to listen and process your spoken requests until you press the button again to switch it off (while the app is listening you can make as many voice requests as you like, you don't need to toggle speech recognition off and back on again if you want to ask another question). "Always on" means the app is always listening for and processing speech commands. Selecting "Disabled" or "Always on" from this list makes the app ignore the button assigned to "Talk to crew chief".

    If you want to use Hold button or Toggle button mode, select a controller device ("Available controllers" list, bottom left), choose "Talk to crew chief" in the "Available actions" list and click "Assign control". Then press the button you want to assign to your radio button.

    You need to speak clearly and your mic needs to be properly set up - you might need to experiment with levels and gain (Microphone boost) in the Windows control panel. If he understood he'll respond - perhaps with helpful info, perhaps with "we don't have that data". If he doesn't quite understand he'll ask you to repeat yourself. If he can't even tell if you've said something he'll remain silent. There's some debug logging in the main window that might be useful.

    I've not finished implementing this but currently the app understands and responds to the following commands:

    "how's my [fuel / tyre wear / body work / aero / engine / transmission / suspension / pace ]"
    "how are my [tyre temps / tyre temperatures / brakes / brake temps / brake temperatures / engine temps / engine temperatures]" (gives a good / bad type response)
    "What are my [brake temps / tyre temps]" (gives the actual temps)
    "what's my [gap in front / gap ahead / gap behind / last lap / last lap time / lap time / position / fuel level / best lap / best lap time]"
    "what's the fastest lap" (reports the fastest lap in the session for the player's car class)
    "keep quiet / I know what I'm doing / leave me alone" (switches off messages)
    "keep me informed / keep me posted / keep me updated" (switches messages back on)
    "how long's left / how many laps are left / how many laps to go"
    "spot / don't spot" (switches the spotter on and off - note even in "leave me alone" mode the spotter still operates unless you explicitly switch it off)
    "do I still have a penalty / do I have a penalty / have I served my penalty"
    "do I have to pit / do I need to pit / do I have a mandatory pit stop / do I have a mandatory stop / do I have to make a pit stop"
    "where's [opponent driver last name]"
    "what's [opponent driver last name]'s last lap"
    "what's [opponent driver last name]'s best lap"
    "what's [opponent race position]'s last lap" (for example, "what's p 4's best lap", or "what's position 4's last lap")
    "what's [opponent race position]'s best lap"
    "what's [the car in front / the guy in front / the car ahead / the guy ahead]'s last lap"
    "what's [the car in front / the guy in front / the car ahead / the guy ahead]'s best lap"
    "what's [the car behind / the guy behind]'s last lap"
    "what's [the car behind / the guy behind]'s best lap"
    "what tyre(s) is [opponent driver last name / opponent race position] on" (DTM 2014 only - reports "options" or "primes")
    "what are my sector times"
    "what's my last sector time"
    "who's leading" (this one only works if you have the driver name recording for the lead car)
    "who's [ahead / ahead in the race / in front / in front in the race / behind / behind in the race]" (gives the name of the car in front / behind in the race or on the timing sheet for qual / practice. This one only works if you have the driver name recording for that driver)
    "who's [ahead on track / in front on track / behind on track]" (gives the name of the car in front / behind in on track, regardless of his race / qual position. This one only works if you have the driver name recording for that driver)
    "tell me the gaps / give me the gaps / tell me the deltas / give me the deltas" (switch on 'deltas' mode where the time deltas in front and behind get read out on each lap. Note that these messages will play even if you have disabled messages)
    "don't tell me the gaps / don't tell me the deltas / no more gaps / no more deltas" (switch off deltas mode)
    "repeat last message / say again" (replays the last message)
    "What are my [brake / tyre] [temperatures / temps]"
    "What time is it / what's the time" (reports current real-world time)


    Other button assignments
    ------------------------
    You can assign the 'toggle spotter on/off' and 'toggle race updates on/off' to separate buttons if you want to be able to toggle the spotter function and toggle the crew chief's updates on or off during the race. This doesn't require voice recognition to be installed - simply run the app, assign a button to one or both of these functions, and when in-race pressing that button will toggle the spotter or crew chief on and off.


    Properties
    ----------
    The settings can be accessed by clicking the "Properties" button in the app. This displays a popup window where you can tweak stuff if you want to. This interface is a bit rubbish but should let you tweak settings if you want to, although the properties are all (currently) undocumented. If you do change something in this interface, the app needs to restart to pick up the change - the "Save and restart" button should do this.

    Each property has a "reset to default" button, or if you get completely stuck you can close the app and delete the user configuration folder and it should reset everything.


    Custom controllers
    ------------------
    This is untested. If your controller doesn't show up in the list of available controllers you can set the "custom_controller_guid" property to the GUID of your controller device. If this is a valid controller GUID the app will attempt to initialise it an add it to the list of available controllers.


    Program start arguments
    -----------------------
    If you want to have the game pre-selected, start the app like this for RaceRoom: [full path]\CrewChiefV4.exe RACE_ROOM.
    This can be used in conjunction with the launch_pcars / launch_raceroom / _launch_exe / _launch_params and run_immediately options to set crew chief up to start the game selected in the app launch argument, and start its own process.

    If you want to run Crew Chief on your 4th CPU core only, and want have the application launch RaceRoom and start running immediately (i.e. just launch Crew Chief and everything else is done for you, no need to click anything else to start Crew Chief listening or launch RaceRoom) you first need to make a couple of Properties changes. Go to the properties screen and set the r3e_launch_exe" property to c:/games/steam/steam.exe (assuming steam is installed in c:/games), check the "launch_raceroom" option, and check the "run_immediately" option. Then create a shortcut to CrewChiefV3.exe with the parameters cpu4 and RACE_ROOM, so the "target" field in the short cut properties looks like this:

    "C:\games\CrewChiefV4\CrewChiefV4.exe" cpu4 RACE_ROOM


    Running on a single CPU
    -----------------------
    You can set the processor affinity for Crew Chief in TaskManager, but this will have to be done each time you start the app. Alternatively, you can start the app with an addition argument "cpu1", "cpu2", ... "cpu8", like this:
    [full path]\CrewChiefV4.exe cpu4
    this will set the processor affinity to the 4th CPU in your system (usually referred to as CPU3 - they're zero-indexed).


    Updating the app
    ----------------
    The app will tell you when there's a new version, or when the sound packs have been updated. App updates are handled by a 3rd party component which will download and execute a new installer. Sound updates are from within the app - just click the download button / buttons and the app takes care of it all.

    Donations
    ---------
    I made this because I wanted to make it and I enjoy making stuff. Working with the various quirks, errors and omissions in the shared data which the games provide hasn't been much fun, but it's all part of the challenge. Having said that, there are many many hours of hard work invested in this.
    If you use it and like it and it becomes a regular and positive part of your sim racing, I'd be grateful if you would consider making a small donation. If only to stop my wife from complaining at me.

    My paypal address and a handy "Donate" button are in my signature.


    Would be great to recoup some of the investment in making this, but the most important thing is that the app is used 'in anger' and enjoyed as part of the sim racing experience. To this end, I'm always on the lookout for bug reports and feature suggestions.

    One final point. If the app says "Jim is faster than you", let him through
    https://forum.sector3studios.com/ind...nd-shiny.2516/

    Een echte aanrader

  2. #2
    Senior Member
    Naam
    Bart Hendrikx
    Lid sinds
    8 juni 2011
    Locatie
    Susteren
    Berichten
    1.188

    Standaard

    Nu ook voor Iracing. Instaleren en proberen

Favorieten/bladwijzers

Favorieten/bladwijzers

Regels voor berichten

  • Je mag geen nieuwe discussies starten
  • Je mag niet reageren op berichten
  • Je mag geen bijlagen versturen
  • Je mag niet je berichten bewerken
  •